|
ZT Series

ZT SERIES » Specifications
 

SPECIFICATIONS

26 HP BRIGGS & STRATTON ELS

27 HP KOHLER
Cutting Width 3600/36"; 5000/50" 5000/50"; 6000/60"
Cutting Height 1.5"–5" with Deck Height Control System 1.5"–5" with Deck Height Control System
Blades 3600/1/4" x 2 1/2" x 18", High Lift, Heat Treated
5000/1/4" x 2 1/2" x 16 1/2", High Lift, Heat Treated		 5000/1/4" x 2 1/2" x 16 1/2", High Lift, Heat Treated
6000/1/4" x 2 1/2" x 20 1/2", High Lift, Heat Treated
Lift and Height Adjustment Instant Lift Electronic Actuator Instant Lift Electronic Actuator
Blade Belt Single V-Belt Spring Tension Single V-Belt Spring Tension
Anti-Scalp Rollers 3600/4 Total (1 On Each Corner, 2 In Rear)
5000/6 Total (2 Front, 2 Rear, 1 On Each Corner)		 5000/6000/6 Total (2 Front, 2 Rear, 1 On Each Corner)
Deck Flotation Floats on 2 Chains & 2 Front Leveling Arms Floats on 2 Chains & 2 Front Leveling Arms
Deck Thickness 3/16" Thick Solid Steel 3/16" Thick Solid Steel
ENGINE     
Gross Horsepower 26HP Air-Cooled Briggs & Stratton Inteck ELS

27HP Air-Cooled Kohler Courage
Cylinders 90 Degree V-Twin

90 Degree V-Twin
Displacement 725 cc 725 cc
Maximum Torque 33 ft. lbs. @ 2600 RPM 45.5 ft. lbs. @ 2400 RPM
Fuel Requirement Unleaded Gasoline (87 Octane or higher) Unleaded Gasoline (87 Octane or higher)
Fuel Capacity 10 Gallons 14 Gallons
Fuel Filter Replaceable Automotive Type Replaceable Automotive Type
Cooling System Air-Cooled Air-Cooled
Ignition Electronic Electronic
Starter 12 Volt 12 Volt
Charging System 16 amp 16 amp

DRIVE SYSTEM

    

Transmission

 Dual Integrated Hydrostatic Transaxle Dual Integrated Hydrostatic Transaxle

Pump Drive

 Integrated Axial Piston Pump & Motor w/Gear Reduction Integrated Axial Piston Pump & Motor w/Gear Reduction

Wheel Drive

 Integrated with Commercial Grade Gear Reduction Integrated with Commercial Grade Gear Reduction

Hydrostatic System Oil

 20W50 Motor Oil 20W50 Motor Oil

Hydraulic Filter

 25 Micron, Replaceable Spin-On Type, 1 Per Pump 25 Micron, Replaceable Spin-On Type, 1 Per Pump
Pumps (2) 10cc Pump and Motor Integrated in one unit 10cc Pump and Motor Integrated in one unit

Hydraulic Coolers (2)

 7" Cooling Fan per Unit 7" Cooling Fan per Unit
WEIGHT 3600/750 lbs; 5000/775 lbs 5000/775 lbs; 6000/800 lbs

Overall Height

 46" 46"

Overall Width

 3600/36"; 4800/49 1/2" 5000/49 1/2"; 6000/61 1/2"

Overall Length

 74 1/2" 74 1/2"

Tire to Tire Width

 45" 45"

Tires—Front

 13 x 6.5–6 Smooth Tread 13 x 6.5–6 Smooth Tread

Tires—Rear

 3600/21 x 7–10 Turf Tread
5000/20 x 10–8 Turf Tread		 5000/6000/20 x 10–8 Turf Tread
Steering Dual Lever Steering, Independent Control Dual Lever Steering, Independent Control

Turning Radius

 Zero Degree, Turns Within Unit Length Zero Degree, Turns Within Unit Length

Ground Speed (forward)

 0–7 mph 0–7 mph

Parking Brake

 Internal Parking Brake Internal Parking Brake